 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| China Electronics Technology Group Corporation No.26 Research Institute 433.92MHz RF SAW Filter 1.7MHz Bandwidth Part Number: SP43303 www.sipatsaw.com SIPAT Co., Ltd. 1. Package Dimension ( S22 ) Unit: mm 3.000.10 1.50 6 2. Marking 43303 Part Number (1) Ink Marking or Laser Marking (2) DF: Manufacture's logo (3) *: Pin 1 Identifier (4) E6: Date code Phone: +86-23-62808818 1 1 6 3.000.13 . 43303 E6 1.60 0.60 5 2 3 2 5 Pin No. Function 1 Input Ground 2 Input 5 Output 6 Output Ground 4,8 Case-Ground 3,7 to be Grounded 4 0.900.08 3 1.5MAX 4 1.30 *E6 E Month code 6 Last figure of year Month Month code 1 A 2 B 3 C 4 D 5 E 6 F 7 G 8 H 9 I 10 J 11 K 12 L e.g.: " E6" means May of 2006 SIPAT Co., Ltd. ( CETC No. 26 Research Institute ) Nanping Huayuan Road No. 14 Chongqing, China, 400060 Part Number Rev. Date Rev. SP43303 2006-7-19 1.0 Page 1/8 Fax: +86-23-62805284 www.sipatsaw.com / sawmkt@sipat.com China Electronics Technology Group Corporation No.26 Research Institute 433.92MHz RF SAW Filter 1.7MHz Bandwidth Part Number: SP43303 www.sipatsaw.com SIPAT Co., Ltd. 3. Performance 3.1 Application Front-end SAW Filter for Wireless Remote Controller. Center frequency: 433.92 MHz 3.2 Maximum Rating Operation Temperature Range Storage Temperature Range DC Voltage Source Power 3.3 Electronic Characteristics -40 to +80 -45 to +85 0V 0 dBm Item Center Frequency (fo) Maximum Insertion Attenuation 433.00 ~ 434.71 MHz Amplitude Ripple 433.00 ~ 434.71 MHz Relative Attenuation 10.00 ~ 380.00 MHz 380.00 ~ 413.50 MHz 413.50 ~ 424.00 MHz 443.75 ~ 454.00 MHz 454.00 ~ 470.00 MHz 470.00 ~ 650.00 MHz 650.00 ~ 1000.00 MHz Temperature Coefficient of Unit MHz Minimum -- Typical 433.92 Maximum -- dB -- 2.0 2.7 dB -- 0.5 1.3 dB dB dB dB dB dB dB Ppm/k 55.0 49.0 40.0 25.0 35.0 48.0 40.0 -- 60.0 53.0 48.0 33.0 44.0 55.0 50.0 -30 -- -- -- -- -- -- -- -- SIPAT Co., Ltd. ( CETC No. 26 Research Institute ) Nanping Huayuan Road No. 14 Chongqing, China, 400060 Part Number Rev. Date Rev. SP43303 2006-7-19 1.0 Page 2/8 Phone: +86-23-62808818 Fax: +86-23-62805284 www.sipatsaw.com / sawmkt@sipat.com China Electronics Technology Group Corporation No.26 Research Institute 433.92MHz RF SAW Filter 1.7MHz Bandwidth Part Number: SP43303 www.sipatsaw.com 3.4 Frequency Characteristics SIPAT Co., Ltd. 3.5 Test Circuit SIPAT Co., Ltd. ( CETC No. 26 Research Institute ) Nanping Huayuan Road No. 14 Chongqing, China, 400060 Part Number Rev. Date Rev. SP43303 2006-7-19 1.0 Page 3/8 Phone: +86-23-62808818 Fax: +86-23-62805284 www.sipatsaw.com / sawmkt@sipat.com China Electronics Technology Group Corporation No.26 Research Institute 433.92MHz RF SAW Filter 1.7MHz Bandwidth Part Number: SP43303 www.sipatsaw.com SIPAT Co., Ltd. 4. Reliability 4.1 Mechanical Shock: The components shall remain within the electrical specifications after three one-half sine shock pulses(3000g's for 0.3 ms) in each direction(for six total) along each of the three mutually perpendicular axes for a total of 18 shocks. 4.2 Vibration Fatigue: The components shall remain within the electrical specifications after loaded vibration at 20~55Hz, amplitude 1.5mm, X,Y,Z, direction, for 2 hours. 4.3 Leak Test 4.3.1 Gross Leak Test: Submerge samples into at +85 water for at least 1 minute. Carefully observe the samples. No bubbles should be seen. 4.3.2 Fine Leak Test: Expose samples for testing to 60 PSIG Helium gas for 2 hours. Then transfer the same samples to another chamber and draw a vacuum. Measure the leak rate. Failure is defined if the leak rate exceeds 5x10-8 atm cc/sec Helium. 4.4 High Temperature Storage: The components shall remain within the electrical specifications after being kept at the 852for 960 hours, then kept at room temperature for 2 hours. 4.5 Low Temperature Storage: The components shall remain within the electrical specifications after being kept at the -402for 960 hours, then kept at room temperature for 2 hours. 4.6 Temperature Cycle: The components shall remain within the electrical specification after 32 cycles of high and low temperature testing (one cycle: 80 for 30 minutes 25 for 20 seconds -40 for 30 minutes) than kept at room temperature for 2 hours. 4.7 Humidity Test: The components shall remain within the electrical specifications after being kept at the condition of ambient temperature 70, and 90~95% RH for 240 hours, then kept at room temperature and normal humidity for 4 hours. 4.8 Solder-heat Resistance: The components shall remain within the electrical specifications after dipped in the solder at 2605 for 10 to 11 seconds, then kept at room temperature for 10 minutes. 4.9 Solderability: Solderability of terminal shall be kept at more than 80% after dipped in the solder flux at 2305 for 51 seconds. 4.10 Storage: The components shall meet the electrical and mechanical specifications after 5 years storage, if stored within the temperature range of -40~+85 and in the humidity of 20 to 60% r.h. SIPAT Co., Ltd. ( CETC No. 26 Research Institute ) Nanping Huayuan Road No. 14 Chongqing, China, 400060 Part Number Rev. Date Rev. SP43303 2006-7-19 1.0 Page 4/8 Phone: +86-23-62808818 Fax: +86-23-62805284 www.sipatsaw.com / sawmkt@sipat.com China Electronics Technology Group Corporation No.26 Research Institute 433.92MHz RF SAW Filter 1.7MHz Bandwidth Part Number: SP43303 www.sipatsaw.com SIPAT Co., Ltd. 5. Remarks 5.1 Static voltage Static voltage between signal load & ground may cause deterioration & destruction of the component. Please avoid static voltage. 5.2 Ultrasonic cleaning Ultrasonic vibration may cause deterioration & destruction of the component. Please avoid ultrasonic cleaning. 5.3 Soldering Only leads of component may be soldered. Please avoid soldering another part of component. 6. Packing 6.1 Dimensions (1) Carrier Tape: Figure 1 (2) Reel: Figure 2 (3) The product shall be packed properly not to be damaged during transportation and storage. 6.2 Reeling Quantity 1,000pcs/reel 6.3 Taping Structure (1) The tape shall be wound around the reel in the direction shown below. TOP COVER TAPE CARRIER TAPE SIPAT Co., Ltd. ( CETC No. 26 Research Institute ) Nanping Huayuan Road No. 14 Chongqing, China, 400060 Part Number Rev. Date Rev. SP43303 2006-7-19 1.0 Page 5/8 Phone: +86-23-62808818 Fax: +86-23-62805284 www.sipatsaw.com / sawmkt@sipat.com China Electronics Technology Group Corporation No.26 Research Institute 433.92MHz RF SAW Filter 1.7MHz Bandwidth Part Number: SP43303 www.sipatsaw.com (2)Lable Device Name Type Quantity Lot No. SIPAT Co., Ltd. (3)Leader part and vacant position specifications. Vacant Components Contained Vacant Leader Part TAPE RUNNING DIRECTION 7. Tape Specifications 7.1 Tensile Strength of Carrier Tape: 4.4N/mm width 7.2 Top Cover Tape Adhesion (See the below figure) (1) pull off angle: 0~15 (2) speed: 300mm/min. (3) force: 20~70g TOP COVER TAPE Direction of pull off CARRIER TAPE SIPAT Co., Ltd. ( CETC No. 26 Research Institute ) Nanping Huayuan Road No. 14 Chongqing, China, 400060 Part Number Rev. Date Rev. SP43303 2006-7-19 1.0 Page 6/8 Phone: +86-23-62808818 Fax: +86-23-62805284 www.sipatsaw.com / sawmkt@sipat.com China Electronics Technology Group Corporation No.26 Research Institute 433.92MHz RF SAW Filter 1.7MHz Bandwidth Part Number: SP43303 www.sipatsaw.com SIPAT Co., Ltd. [Figure 1] Carrier Tape Dimensions W 12.0 0.3 F 5.5 0.1 E 1.75 0.1 P0 4.0 0.2 P1 4.0 0.1 P2 2.0 0.2 D0 1.5 0.1 D1 1.5 0.25 t1 0.31 max. t2 1.95 max. A 3.3 max. B 3.3 max. [Figure 2] Reel Dimensions [Unit: mm] Tape Running Direction [Unit: mm] SIPAT Co., Ltd. ( CETC No. 26 Research Institute ) Nanping Huayuan Road No. 14 Chongqing, China, 400060 Part Number Rev. Date Rev. SP43303 2006-7-19 1.0 Page 7/8 Phone: +86-23-62808818 Fax: +86-23-62805284 www.sipatsaw.com / sawmkt@sipat.com China Electronics Technology Group Corporation No.26 Research Institute 433.92MHz RF SAW Filter 1.7MHz Bandwidth Part Number: SP43303 www.sipatsaw.com SIPAT Co., Ltd. [Figure 3] Part Direction Tape Running Direction 43303 43303 . E6 . E6 SIPAT Co., Ltd. ( CETC No. 26 Research Institute ) Nanping Huayuan Road No. 14 Chongqing, China, 400060 Part Number Rev. Date Rev. SP43303 2006-7-19 1.0 Page 8/8 Phone: +86-23-62808818 Fax: +86-23-62805284 www.sipatsaw.com / sawmkt@sipat.com |
Price & Availability of SP43303
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |